| Shop |
| Products |
| Downloads |
| Services |
| Research |
| Nature |
| Press |
| Tech Notes |
| Contact |
Request quote for latest offers. Prices in USD.
Shop: Overview - Instruments - Options - Accessories - Network - Spares
 |
PC software: SediMeter.exe ver 2.0 Site license for Windows software for managing SediMeter and LogDator instruments. The software is included in the SediMeter kit. Supports setup, download, analysis, and real-time monitoring. Recalibration of instruments requires separate password. Delivered on CD. More... |
Item: SMexe-Ver2 |
 |
This polycarbonate tube is 900 mm long. If you want a shorter holder tube, simply cut the top off to the desired length (using a saw or a pipe cutter). The bottom end is threaded to fit the anchor and the tip. Every time the anchor is retrieved there is a risk of scratching, especially in sand. Use a new tube for critical missions. |
Item: LM-05-A |
 |
Screw for the holder tube. Use the handle to screw this anchor down into the sediment with the holder tube attached. Pull off the handle and insert the SediMeter in the tube. Secure with the yellow finger screw. Diameter 100 mm. Made from stainless steel (marine grade, 316 / A4). It has a thread for the tube and a bayonet for the handle. |
Item: LM-04 |
 |
Handle for screwing down the anchor into the sediments, and for retrieving it again at the end of the mission. You only need one handle (and possibly one as backup) no matter how many SediMeters you have. Made from anodized aluminium in contrasting colors for good visibility. Cotter pin in stainless steel (marine grade, 316 / A4). |
Item: LM-06-AL |
 |
Push-in tip for SediMeter holder tubes. Use the tool below to push the SediMeter into soft bottoms. The 1/4" hole can be used for attaching a retrieval line, such as a strong fishing line that goes to a small float on the water surface. Made from stainless steel (marine grade, 316 / A4). L 100 mm, D 20 mm. |
Item: LM-04-01 |
 |
Tool for pushing a SediMeter with integral LogDator (e.g. SM2A) into a soft bottom from a boat or from ice. Use with the tip above. Buy as many rods (below) as are required. Not compatible with optional light sensor or UW bulkhead connector. This method of mounting the SediMeter is suitable for low-energy environments with very soft bottoms, where diving is not an option, or when one does not want to disturb the sediments by screwing down an anchor. Made from polycarbonate with stainless steel screw (marine grade, 316 / A4). |
Item: LM-12-01 |
  |
Rod for pushing, 1.8 m long, 12.7 mm diameter. Connector included. Combine for the required length. Weight 1.85 kg. Made from stainless steel (marine grade, 316 / A4). |
Item: LM-12-01 |
 |
Li batteries size AA, 3.6 V. Two required per SediMeter or LogDator. Sold as a pair. |
Item: SM2-BATT |
 |
USB A to Mini-B, 1 m. |
Item: USB-A-MiniB-1m |
 |
SD or MMC memory card, size depending on availability (128 MB to 2 GB). We try to find low-power cards. If you buy in a store, a tip is to get the smallest memory possible with the oldest technology, since the development in general is towards more and more energy-demanding cards. [NB: High density cards do not work.] |
Item: MMC-128MB |
 |
Dummy Plug for Bulkhead Connector When no cable is connected this plug protects the bulkhead connector from corrosion and from getting filled with dirt. |
Item: LM-09-03 |